Convectors

Convector Models

Type FS-A/FSG-A
FS-A/FSG-A Free-Standing Cabinet Enclosure

The type FS-A Free-Standing Cabinet Enclosure is designed to be used exposed and fitted flush against the wall. Readily installed without alteration of wall interior, The FS-A enclosure is frequently used for system modernization where it is desirable to avoid the expense of recessing the unit in the wall. Arched inlet shown is standard. Unit may be provided with integral inlet grille,(FSG-A).

Type W-A
W-A Convector

The W-A Convector is a completely exposed wall hung unit with flat top. Outlet grille is in the face of the enclosure. Enclosure front wraps around unit and fastens to sides of cabinet with clips. Air inlet is through open bottom of unit enclosure.

Type SR-A/SRG-A
Semi-Recessed
SR-A/SRG-A Convector Enclosure

Cabinet design is similar to FS-A model. Enclosure projects only 2 1/4" from wall, Complete unit includes enclosure, front panel with outlet grille and arched inlet opening, heating element. Front panel is easily removed for cleaning or access to heating element. Unit may be provided with integral inlet grille, (SRG-A).

Type PW-A/PWG-A
PW-A/PWG-A Convector Enclosure

This is a partially recessed unit with rounded flange front and venetian type air outlet grille, standard for wall mounting as illustrated. Cabinet extends only 2 1/4" from wall. Enclosure front fastens and screws to brackets on unit liner installed in wall recess. Air inlet is through open bottom of unit (PW-A). Unit may be provided with integral inlet grille, (PWG-A).

Type SF-A/SFG-A
SF-A/SFG-A Free-Standing Cabinet Enclosure

The Type SFA Free-Standing Cabinet Enclosure is designed to be used exposed and fitted flush against the wall. Readily installed without alteration of wall interior, the SF A enclosure is frequently used for system modernization where it is desirable to avoid the expense of recessing the unit in the wall. Arched inlet shown is standard. Unit may be provided with integral inlet grille,(SFG-A).

Type SW-A
SW-A Wall-Hung Enclosure

This model is fully exposed wall hung with outlet grille located in sloping top. Enclosure wraps around unit and fastens to sides with clips. Air inlet is through open bottom of unit. Slope of top is 30°. Consult factory for availability with stainless steel.

Type RF-A/FRG-A & FWG-A
Fully Recessed Wall Enclosure

Designed to be fully recessed within the wall. The flanged edge metal front contains the outlet grille and inlet opening and is fastened by screws. It is easily removable for heating element access. The standard unit is arranged for floor mounting with arched inlet opening, (RF-A). Unit may be provided with integral inlet grille (RFG-A shown). TYPE FWG-A unit is similar, but for wall mounting with integral inlet grille. All units extend 13/16" from wall. Consult factory for availability of FWG-A models in stainless steel.